Pyle WATCHDOG PLMCWD15, Руководство пользователя

Страница: 9 / 12

1). Transmitter is ineffective or the control dis-
tance decreased significantly.
t Tall building, radio tower or high frequency
electromagnetic wave may affect the control
range.
t Low power of the battery.
t
The transmitter is broken or damaged.
t The installation location of the antenna is
wrong. You should straighten the antenna and
keep it away from other wire harness.
2). The siren does not chirp when the alarm sys-
tem is triggered.
t The wire connection between the siren and
ECU has problem.
t
The siren is damaged.
3). The system gives false alarms when heavy
vehicles by passing.
t
The sensitivity of the sensor is too high.
4) The continuous chirping of the siren cannot be
stopped by transmitter after installing the ECU.
t The plug is improperly inserted.
t The wire is improperly connected.
t
The siren is damaged.
5) If the problem persists, please follow these
steps
t
For consumer: contact your dealer or nearby
service center.
t
For installer or dealer: email your question to
us and we will reply ASAP.
TROUBLESHOOTING
9