Pyle Vintage PTTCSM70BT, Руководство пользователя

Страница: 8 / 12

www.PyleUSA.com
8
II. Recording the complete CD
1. Place a cd with the printed side facing up inside the cd tray & then close the cd door.
2. After disc search has been completed, press the “
RECORD
“ button (3) –
note:
Do not press "
PLAY
" and then
"
RECORD
", or only the selected track will be recorded.
3. “ “ & “ “ will be flashing on the lcd display to show encoding is in progress.
4. After the encoding process has finished, the unit will stop playback automatically.
III. Encoding by Program
1. Place a cd with the printed side facing up inside the tray & then close the cd door
2. Select the desire tracks by following “
CD DISC PROGRAMMING
“ procedures. Then press “
CD PLAY / PAUSE
/ STOP
“ button (16) to start playback.
3. Playing cd playback, press and hold the “
CD PLAY/PAUSE/STOP
“ button (16) for 2 seconds to enter the stop
mode.
4. Press the “
RECORD
“ button (3) and the unit will display “ “ & “ “ & flashing. Encoding is performing
now. After the encoding is completed, unit will stop playback automatically.
Remark:
• The recording speed is 1:1 and according to the actual plying time of the CD/ phono or tape
• During copy mode, the system will copy the MP file only.
• The system will create a “
AUDIO
“ folder for encoding file and “
FCOPY
“ for copying file.
• The recording format is preset at – MP3 bit rate : 128 kbps, sampling rate : 44.1khz
• No song title will be recorded during encoding mode
• To interrupt the recording, press the “
RECORD
“ button again during record mode.
• The system will store the file to USB source first if both USB and SD slot are being occupied during encoding.
• Copy MP3 file from USB/SD will be successful only if the entire song is being copied, if the copying process is
intermediately terminated, there is no track being recorded nor stored to the USB or SD/MMC card.
IV. Copying of MP3 File
If putting a MP3/WMA disc instead of a CD-DISC, the system will copy the files to the USB or SD card if press
the “
RECORD
“ button (3). The operation procedures is same as cd encoding as stipulate on above, and the
system will switch to copying mode only if MP3/WMA file being read.
Remark:
• The system will store the file to USB source first if both USB and SD slot are being occupied by storage media.
• If press the “ Record “ button during playback of USB or SD source, the file will copy from USB to SD or SD to
USB.
B. Phono Encoding
1. Plug in the USB pen drive for recording (make sure it had enough empty space).
2. Set the function button (6) to “ Phono “ position and then press the “ record “ button (3) directly.
3. The LCD display (2) with show the word “ USB “ and flashing, after then display “ “ & “ “ and flashing.
Now the system is starting the encoding mode.
4. Start playback at phono for the track which you want to record to USB or SD card.
5. After finish of recoding, press and hold the “ Record “ button (3) until the LCD stop flashing and return
to “
PHONO
“ mode.
C. Cassette Encoding
1. Plug in the USB pen drive for recording (make sure it had enough empty space).
2. Set the function button (6) to “
Tape
“ mode and then press the “ record “ button (3) directly.
3. The LCD display (2) with show the word “
USB
“ and flashing, after then display “ “ & “ “ and flashing.
Now the system is starting the encoding mode.
4. Start playback of cassette tape(at either deck 1 or 2) which the track you prepare to encoding to MP3 format.
5. After finish of recoding, press and hold the “
Record
“ button (3) until the symbol “ “ & “ “ disappear
and resume to “
Tape
“ mode on LCD display (2).