Pyle Vintage PTCDS7UBTB, Руководство пользователя

Страница: 5 / 10

www.PyleAudio.com
Pyle Vintage
- Classic Style Turntable Systems
CD/MP3 disc programming (by remote control), continued...
5. Repeat steps 3 and 4 to enter additional tracks into the memory if necessary.
6. When all the desired tracks have been programmed, press CD “ Play/Pause/Stop ” button (20)
to play the disc in assigned order.
7. To cancel the programmed file, press “Stop” button on remote handset until “ PROG “ indicator is
disappear on LCD display (2)
Playback of MP3 song via USB storage media or memory card
Connecting
The system is able to decode and playback all MP3 files which are stored in the memory media with USB
connecting port or SD/MMC memory card.
1. Set Function selector (3) at CD/USB/SD mode and then press
source button (8) to select “ USB or Card” mode.
2. Plug-in the USB plug with the face up & make sure it going into
completely or insert the memory card in the direction of the
arrow as shown in the label on the underside of the memory
card slot cover. Insert straight without bending.

Connecting the UBS upside down or backwards could
damage the audio system or the storage media (USB
thumb drive / SD/MMC card). Check to be sure the
insertion direction is correct before connection.
3. The system will start reading the storage media automatically after connecting, and LCD display (2)
will show the total number of MP3 files and total number of folder being detected.
4. Repeat the same playback procedure as playing CD/MP3 disc as above
Notes:
- The system can detect and read the file under MP3 format only though the USB or SD flash card.
-
If connect the system to MP3 player via the USB socket, due to variances in MP3 encoding
format, some MP3 player may not be able to play via the USB socket. This is not a malfunction
of the system.
- USB port does not support connection with USB extension cable and is not designed for
communication with computer directly.
Listing to tape cassette
General operation
Cassette playback The system will start the playback automatically after inserting of cassette tape.
Stop and ejection Press the “ Tape forward / eject “ button completely inwards and the cassette. Tape
will be ejected though the cassette door cover. The “ Tape forward/eject“ button will
keeping at lowest height position.
Fast forward Press the “ Tape forward / eject “ button half inwards during playback mode, the
tape winding forward direction. The “ Tape forward / eject “ button will keeping at
middle height position.
Slightly press the “ Tape forward / eject “ button again to resume normal playback. The “ Tape forward /
eject “ button will resume to the highest position.