Pyle Surveil PLDVRCAMAND75, Руководство пользователя

Страница: 18 / 24

17
Installation Instructions
1. Ensure that the vehicle is in a power off state
2. Remove the original car host and host support and then the navigation
recorder host and host frame fixed in the original car windshield.
3. BMW will be transferred to the line and the external transfers line to the
good and then extend the line along the car windshield edge into the car
to the car.
4. The host side of the original car line is divided into 4
B+ (Yellow line)
ACC+ (Red line)
GND (Black line)
Reverse Control Line (Red line)
www.PyleUSA.com
Open the box when the car is not
turned on, using a DC block test with a
million 12V voltage that is connected
to the (B+)
Open the box, in the start of the state of
the car (do not start when the voltage is
0V) with a DC block test with a 12V
voltage at the (ACC+).
Open the safe box around the iron
to find a reliable ground source to
connect (GND)
Open rear end case, find the position of the back
lamp joint. Start the car, hang reverse gear (R)
gear, 12V voltage; neutral (N) to the end of the
0V line connected (reverse control line)