Pyle SereneLife SLSUPB10, Руководство пользователя

Страница: 4 / 8

GETTING STARTED
CONTENTS
• Paddle-Board
• Coiled Ankle Cuff Safety Leash
• Oar Paddle
• Manual Air Pump
• Patch Repair Accessory Kit
• Storage / Carry Bag
INFLATING THE SUP BOARD
1. Roll out the SUP board until it is laying flat with top side facing up.
2. Push the air valve down while at the same time twisting slightly. This will put the air valve in the up
position (Note: when the air valve is UP, air can only flow into the SUP board. When it is in the DOWN
position, air can flow in and out of the SUP board).
3. Attach the pump to the air valve with a half twist motion (clockwise).
4. Begin pumping air into the SUP board. Try to maintain proper posture and leverage while you pump
(Note: You can split the pump into parts--the pump, hose and valve--by screwing the ends together).
5. Remove the pump with a half twist motion (counter-clockwise).
6. Screw on the air valve cap.
4
www.PyleUSA.com