Pyle SereneLife PSLHTM20, Руководство пользователя, Страница: 3 / 8

4. USING THE TREATMENT OF ELECTRIC TOOLS.
•
Do not overload your tool. Only use suitable electric tools to perform your work.
Using the right electric
tool allows you to work better and safer within the tool’s quoted capacity range.
•
Do not use an electric tool whose switch is defective.
An electric tool that no longer can be switched on
or off is dangerous and must be repaired.
•
Pull the plug out of the socket and/or remove the battery before making any adjustments to the tool,
changing accessories or put the tool down.
This precaution eliminates the possibility of inadvertently
starting the tool.
•
When not in use, store electric tools out of the reach of children. Do not allow those persons to use this
tool who are unfamiliar with it or who have not read these instructions.
Electric tools are dangerous
when they are used by inexperienced persons.
•
Take good care of your tool. Check that moving parts properly function and do not jam, that parts are
not broken off or damaged in any way and that the tool can be used to its full capacity. Have damaged
parts repaired prior to using the tool.
The cause of many accidents can be traced back to poorly main
tained electric tools.
•
Keep your blades sharp and clean.
Properly maintained blades with sharp edges jam less frequently and
are easier to use.
•
Make sure to use electric tools, accessories, attachments, etc. in accordance with these instructions.
Take the conditions in your work area and the job in hand into account.
Using electric tools for
applications other than those intended can lead to dangerous situations.
5. CAREFUL HANDLING AND USE OF CORDLESS EQUIPMENT.
•
Ensures that the equipment is switched off before you insert the battery.
Inserting the battery into an
electric tool that is switched on can cause accidents.
•
Only charge the batteries in charges that are recommended by the manufacturer.
A charge that is
designed for a certain type of batteries may pose a fire risk if it used with other types of batteries.
•
Use only the correct batteries in the electric tools.
The use of other batteries may result in injuries and
fire risk.
•
Keep unused batteries away from paper clips, coins, keys, nails screws and other metallic objects that
could cause a short circuit between the contacts.
A short circuit between the battery contacts may cause
burns or a fire.
•
In case of incorrect use, fluid may escape from the battery. Avoid contact with it. If you touch it by
mistake, rinse the affected area with water. If you get the fluid in your eyes, also seek medical advice.
Leaking battery fluid can cause skin irritation or burns.
6. SERVICE
•
Have your tool repaired only by authorized specialists using original replacement parts.
This will ensure
that your tool remains safe to use.
ADDITIONAL SAFETY NOTES
• The battery pack supplied with your cordless tool is not charged. The battery pack has to be changed
before you use the tool for the first time
• The battery pack does not reach its maximum capacitance until it has been charged and discharged
approximately five times.
• Battery pack lose their charge even when they are not being used. Regular charging is therefore
recommended.
• Please check the data marked on the rating plate of the battery charger. Be sure to connect the battery
charger to a power supply with the voltage marked on the rating plate. Never connect it to a different
mains voltage.
• Keep the battery charger and the cordless tool out of children’s reach.
• Wear suitable work clothes. Wear safety goggles.
• Never open the battery pack. Avoid contact with a leaking battery pack. In case of accidental contact wash
the affected area of skin with soap and water. If battery acids gets in your eye, rinse out the eye with clear
water for at least 10 minutes and seek a doctor’s advice immediately. Neutralize other affected areas with a
mild acid such as lemon juice or vinegar.
2
www.PyleUSA.com