![Pyle PWPBTA70 Скачать руководство пользователя страница 7](http://html1.mh-extra.com/html/pyle/pwpbta70/pwpbta70_user-manual_1631040007.webp)
7
SPECIFICATIONS
AMPLIFIER section
Output Power
………….
2 X 15W
Frequency Response
………….
60 to 20,000 Hz
SPEAKER SYSTEM section
Type ………….
1-way
Impedance ………….
4
Ohm
Output Power
………….
2 X 15W
GENERAL
Power Requirements
………….
The built-in lithium battery voltage 3.7V
Lithium battery capacity:1400mA
Dimensions (H x W x D)
………….
2.76 x 8.5 x 2.56 Inches without hand buckle
USB Charge
………….
USB charge voltage 5V
Standard Accessories
………….
USB Cable
AUX IN Cable
this equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna. Increase the separation between the
equipment and receiver. Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected. Consult the dealer or an experienced radio/TV
technician for help