-8-
-5-
2. Some displays have cur ved backs with
recessed mounting lands(Fig.a). It will
require the use of spacer. For this display,
install a spacer(M) between display and
the bracket. As shown in Fig 1b.
Fig a
Brick, Concrete and Stone wall:
Using a awl or nail to make where the nails are located. Distance between two nails
for fixing wall mount must not less than 16 . Pre-drill these holes with a 10mm drill
bit to at least 80mm in deep hole. Use wall mount as a template to mark the location
of other three holes and drill the same holes. Please make sure these holes are level
and eudipleural. Insert wall anchors(K) into each of these holes. Attach the wall
mount to the wall using 4 long bolts(J) and washers(L).
”
Brick, Concrete and Stone wall:
Fig. 2e
J
L
Concrete Wall
K
Concrete Wall
80
10
Fig. 2d
Fig 1b
M6 Fig bit
F
3
I
M
2
G
I
M
H
3
I
M
M5 Fig bit
M8 Fig bit
