www.PyleUSA.com
6
www.PyleUSA.com
7
TROUBLESHOOTING
Try the troubleshooting steps below if you are having problems while using your
speaker. If problems still exist, please look for a qualified technician or contact our
company. To prevent electric shock or expand the scope of the malfunction, do
not repair by yourself.
Features:
•
PA Loudspeaker Karaoke Entertainment System
•
High-Powered Active Speaker Tower
•
Multi-Colored DJ Flashing LED Lights Pulse to the Music
•
Wireless BT Music Streaming
•
USB Flash and SD Memory Card Readers
•
Includes Wireless Handheld Microphone
•
Digital LCD Display with FM Radio
•
Top Panel Audio Control Center
•
(2) 1/4'' Microphone Inputs
•
RCA (L/R) Aux Input
•
Connect and Stream Audio from External Devices
•
Convenient Carry Handles and Rolling Wheels
•
Treble, Bass, Echo, Volume Controls
•
DJ Party Lights ON/OFF Switch
Technical Specs:
•
MAX Power Output: 2400 Watt
•
Sound System: Dual 10'' Woofers, Dual 3'' Tweeters
•
Frequency Response: 45Hz-20kHz
•
Sensitivity (1w/1m): 92dB
•
Impedance: 4 Ohm
•
Maximum SPL: 128dB
•
Dispersion (@6dB): H90°X V50°
•
Crossover: 3 kHz
•
Power Supply: 110/220V
•
Microphone Battery Operated: Requires 2 x 'AA'
•
Maximum USB Flash/SD Memory Card Support: 32GB
•
Dimensions (L x W x H): 16.9'' x 15.8'' x 42.3''
SYMPTOM
POSSIBLE PROBLEM
SOLUTION
No function light
and No sound
1. Plug is not well connected
2. Speaker power button is
not turned on.
1. Insert the plug into electrical
outlet.
2. Turn on the power button
Function light is
turned on but no
sound
1. Cable misconnected
2. Speaker are not connected
or misconnected
3. Audio signal is not trans-
mitted to speaker
1. Turn off the power, check the
input jack to ensure proper
audio signal is connected to
relevant input jack
2. Power off, then check and
confim the cable connection
again.
3. Check all the speaker if there
is audio signal output
Remote control
does not work
1. Before you press any function button, first select the correct
source with the remote control instead of the main unit
2. Reduce the distance between the remote control and unit
3. Insert the battery with its polarities (+/-signs) aligned as
indicated
4. Replace the battery
5. Aim the remote controldirectly at the sensor on the front
of the unit.
If the problem exists after checking related procedures above, please refer to
the appointed service ... Do not attempt to open the cover, otherwise we
assumes no responsibility
