4
9.
Again, tighten all the screws to secure the
stand.
10.
Peel the protective paper off the back of
the pads and stick them on the top of your
stand. This will protect your speaker and help
isolate sound from resonating in the stand.
11.
From the bottom, screw each spike into the
four remaining holes.
Congratulations! Your stand is complete. To
build the other stand in your pair, simply repeat
these instructions from step 1.
Be sure to fill out your warranty card or submit
your product registration online at
www.pyleaudio.com.
Product Specifications
One Pair of Speaker Stand For A Large
Bookshelf Speaker
Perfect For Home, Project Or Professional
Recording Studios
Steel, Attractive Design Incorporating Cable
Management
Vertical Columns May Be Sand Loaded To
Deaden Sound And Increase Stability
Heavy-Duty Steel Construction With Black
Finish
Conceals Cables For A Great Looking Setup
Quad-Support Provides Security And
Strength With Style
Adjustable Spikes On Bottom For Additional
Stability
Maximum Weight Capacity: 75lbs.
Setup Height: 38''
Product Weight: 8.90 Lbs.
Base Plate Size: 8.3'' × 11.3''
Top Plate Dimensions: 7'' X 9.5''
Tube Diameter: 4 Pcs X 1.2'' × 36.0''
Dimensions: 3.1'' X 9.8'' X 36.2''
Note:
Steps 10 and 11 are
optional. The pads will help
prevent your stand from
resonating, and the spikes will
isolate your stand from the desk
or carpet. They are not necessary,
but may improve the sound of
your speakers.
