Bill Exit
Power On
/
Off Switch
AC Power Input
USB Software
Upgrade Input
4 Digit LED Display
Red
/
Fail
Green
/
Pass
Bill Entrance
/
Exit
Status Indicators
Function Button
Introduction
:
Counterfeit Bill Detector
Counterfeit Bill Detector
Operating Instructions
:
Starting up
Plug the power cord into the AC power input and plug the AC adapter into any
standard AC 110 volt or 220 volt outlet
.
Switch the machine onto the ON position
.
The machine will then go though a calibration setup
.
• The unit will display
(8.8.8.8.).
• The unit will then sound two (2) beeps and a
Window.
• The machine will then verify the default currancy.
(
EUr
) Euro will show in the LED display.
• (
UUUU
) or ( ) will then be displayed.
This indicates the direction the bill will exit
after it is scanned. (See
Function
Button)
• The motor will then cycle twice.
• Once a (
0
) is displayed in the LED, the unit
is now ready use.
Getting Started
Once the (
0
) is displayed in the LED, the machine is ready to use.
• Place a bill along the left edge of the entrance
with the top of the head on the bill to the right.
• Gently push the bill into the entrance throat.
• The machine will pull the bill into the unit. It will
scan the bill for (
IM
) correct direction of bill
being fed (
IR
) Infrared characteristics, (
UV
)
Ultraviolet characteristics and (
MG
) Magnetic
strip detection.
• The machine will discharge the bill either through
the front of rear of the unit.
If The Banknote Passes Inspection
• If the bill passes inspection, the light in the
• The unit will sound a beep.
• The denomiation of the bill will be displayed
by the LED.
If The Banknote Fails Inspection
• If the bill fails inspection, the light in the
• The Unit will sound with (3) beeps.
• The LED will display the same amount
before the last bill was inserted.
• Failure Lights will display for feature or
Ready to Use
Place Bill Along Left Edge
Passes with GREEN Light
and Bill Denomination Displayed
Failed with RED Light
Failure LED Indicators Light
UUUU
C
alibration
Display
features which did not pass.
(Status Indicator)
