2
Read this manual carefully before using this product. Heed the
instructions to keep your warranty for this product. Prevent fire or
electric shock. This product may only be repaired by qualified
servicing personnel.
Keep this manual for future reference.
- Keep the original packaging in case of defects. Return the product in its original
packaging.
- Consult a professional before installing this product.
- This product contains high-voltage parts;
NEVER
open the housing!
- Never pull the power cord while disconnecting it from the mains socket. Remove the
power cord by pulling the connector.
- Never connect or disconnect the power cord with wet hands.
- If the connector or the power cord is damaged; they need to be replaced (or repaired) by
a qualified serviceman.
- If the housing is damaged in such away so you can see internal parts, you may
NEVER
connect the power cord with the mains socket and you may
NEVER
switch the product
on. Please contact your dealer if this situation occurs.
- This product may only be repaired by qualified servicing personnel.
- Only connect this product with a 230VAC/50Hz earthed power supply.
- Don't install this product near heat sources like radiators etc. Don't install on vibrating
surfaces.
- Always disconnect this product during thunderstorms. Also disconnect this product when
not in use for a long period of time.
- Water vapour might occur at first use after a long period of not using this product. Please
let the product reach room temperature before using it.
- Never use this product outdoors or in a wet environment.
- To prevent accidents in professional environments; please heed instructions and
guidelines at all times.
- Keep this product out of reach of children.
- Don't use cleaning spray to clean this product. Remainders of cleaning sprays are
responsible for the build-up of dust and grease. Please contact a servicing company
when this product is malfunctioning.
- Please clean your hands before using this product.
- Don't use excessive force while controlling this product.
- Place this product on a stable and a evened surface.
-
NEVER
look directly in the projection lens.
-
Only power this product off when the fan stops blowing;
the lamp may blow during
abrupt shutdowns? this may cause fire or electric shock.
-
NEVER
touch the grille or bottom part of the housing because of heated airflows.
- Clean the air filter at least once a month and
NEVER
look directly into the air filter
during operation.
- Never clean this product with chemical solutions. This might damage the paint. Use a
dry cloth instead.
- Install out of the way of electronic devices that might cause humming malfunctions with
this product.
- Only use identical servicing parts when servicing this product. Irreparable damages or
radiation might occur.
