Pyle PRJLEDLP205, Инструкция по эксплуатации

Страница: 21 / 41

EN-20
Adjusting Projection Image Size
Refer to the graphic and table below to determine the screen size and projection distance.
Note
Position the projector in a horizontal position; other positions can cause heat build-up
and damage to the projector.
Keep a space of 30 cm or more between the sides of the projector.
Do not use the projector in a smoky environment. Smoke residue may build-up on
critical parts and damage the projector or its performance
.
It is recommended that if you intend to permanently install the projector, you should
physically test the projection size and distance using the actual projector in situ before
you permanently install it, so as to make allowance for this projector's optical
characteristics. This will help you determine the exact mounting position so that it best
suits your installation location.
Maximum zoom
Minimum zoom
Projection distance
Center of lens
Screen
Vertical offset
The screen aspect ratio is 4:3 and the projected picture is 4:3
Screen size Projection distance (mm)
Vertical offset
(mm)
Diagonal
W
(mm)
H
(mm)
Min
distance Average
Max
distance
Inch mm
(max.
zoom)
(min.
zoom)
35 889 711 533 1401 1472 1543 80
40 1016 813 610 1600 1680 1760 91
50 1270 1016 762 2000 2100 2200 114
60 1524 1219 914 2400 2520 2640 137
80 2032 1626 1219 3200 3360 3520 183
100 2540 2032 1524 4000 4200 4400 229
120 3048 2438 1829 4800 5040 5280 274
150 3810 3048 2286 6000 6300 6600 343
200 5080 4064 3048 8000 8400 8800 457
220 5588 4470 3353 8800 9240 9680 503
250 6350 5080 3810 10000 10500 11000 572
300 7620 6096 4572 12000 12600 13200 686
•
•
•
•