Pyle PRJAND818, Руководство пользователя

Страница: 4 / 12

Input Source
PC-RGB
HDMI
ANDROID
picture1
picture4
I. How to enter the Android System
Projector is turned on after the blue screen appears.
Please press the "source" button on projector top panel or remote control
select the source of the "Android" and press the "OK" button
to enter the main interface of the Android system (Android
System Loading need a little time) .
(As shown in picture 1)
III. How to connect to the WIFI :
Please press the "android Home" key on the remote control, the main screen appears.
Press "left"key to choose the "settings" in the android home page(as picture 2).
Then press the "OK" button to enter the settings .choose "network" and select the wireless router
which you want to connect in the list, enter the password, and then click "Connect"
If the connection is successful and "wi
fi connected "icon will be displayed
(As shown in picture 4).
The steps of operating the Android projector by computer mouse (wire or wireless)
are same as above.
picture6
YPbPr
OK
Input Source
PC-RGB
HDMI
ANDROID
picture2
picture5
Instructions of Android Projector
:
YPbPr
VGA
HDMI
AV
picture 3
19
II. How to operate Android System
1) After entering the main interface of Android System (As shown in Picture 2) .
there are two operating methods which can be selected:
A) Use remote control .
B) Insert your computer mouse (wire or wireless) into the projector's
"USB1 or USB2"Interface . (As shown in Picture 3)