34
ATSC TV
—CVBS—S-VIDEO—YUV—HDMI1—HDMI2—PC
Adjusting
Adjusting
Adjusting
Adjusting the
the
the
the projected
projected
projected
projected image
image
image
image
Adjusting
Adjusting
Adjusting
Adjusting the
the
the
the projection
projection
projection
projection angle
angle
angle
angle
Place the projector on a surface level, move the projector to be in the
center of the screen and make it perpendicular to the screen, with the
top and bottom edge of the projection image parallel to the screen.
There are two adjuster feet on the bottom of the projector. These can
be used if necessary to change the projection angle. Screw the feet in
or out as appropriate to aim and level the projection angle.
Note:
Note:
Note:
Note:
● Please do place the projector on a surface level firstly, otherwise the
projection image will be unadjustable.
● If the screen and the projector are not perpendicular to each other,
the projected image becomes vertical trapezoidal, which can not be
adjusted by this projector. Please adjust the projector again to make
it perpendicular to the screen.
Choosing
Choosing
Choosing
Choosing the
the
the
the image
image
image
image size
size
size
size and
and
and
and sharpening
sharpening
sharpening
sharpening the
the
the
the clarity
clarity
clarity
clarity
1.Change the projection distance to get the projection size that you
need according to the screen dimension table on Page 19 and 20 for
reference.
