CHAPTER 1
.
YOUR FIRST SESSION WITH THE DEP
.
Unpacking and Inspection
.
Your DEP was packed carefully at the factory, and the shipping carton was designed to protect
the unit during shipping. Please retain this container in the highly unlikely event that you need to
return the DEP for servicing.
.
The shipping carton should contain the following items:
.
This instruction manual
.
SHOW DEP with the same serial number as shown on shipping carton
.
AC Power Supply Adapter
.
DEP Quick Guide/Program Chart
.
Basic Connections
.
The DEP will work in many different applications, whether you are connecting an instrument
dir-ectly into it, or connecting it with a mixing console. Briefly described here are the basic conne
-ctions to get you up and running quickly. For more information on connections, please refer to
Chapter 2.
Mono In, Mono or Stereo Out:
Connect a 1/4" phone cord to the [LEFT/MONO] INPUT of the
DEP from a mono source. (The Left input will feed both inputs.) Connect another 1/4"
phone cord from the [LEFT] OUTPUT of the DEP to an amplification system or mixer input.
Additionally, you could connect a second 1/4" phone cord to the [RIGHT] OUTPUT for use with
a stereo amplification system, or two mixer inputs.
.
Stereo: Connect two 1/4" phone cords to the [LEFT/MONO] & [RIGHT] INPUTS of the DEP
from a stereo source , and two 1/4" phone cords from the [LEFT/MONO] & [RIGHT] OUTPUTS
of the DEP to a stereo amplification system or two mixer inputs.
.
If connecting to a mixing console's aux sends/returns, you will want to turn the [MIX] knob fully
clockwise so that the DEP outputs only wet (effected) signal.
.
0
10
0
0
10
10
FROM INSTRUMENT OR EFFCTS SEND
LEFT INPUT
RIGHT INPUT
LEFT OUTPUT
RIGHT OUTPUT
1
This is a 1/4" phone jack which connects to a footswitch (with latching), either normally-open or
normally-closed. When the footswitch is in the state of "OFF", the function will be "EFFECTS".
In the other hand, when the footswitch is in the state of "ON", the function will be "BY-PASS".
These are 1/4" unbalanced phone jacks which connect to sources such as the effects sends of
mixing consoles. They may be used with nominal input levels from -20dBV (guitar level) to +4dBu.
For mono applications, use the [LEFT/MONO] input.
The [LEFT/MONO] input jack is normalled to the [RIGHT] jack. This means that when nothing is
plugged into the [RIGHT] input jack, the signal present at the [LEFT/MONO] input is routed to the
[RIGHT] as well.
These are 1/4" unbalanced phone jacks which connect to devices such as the effects returns on a
mixing console or power amplifier inputs. For mono applications, use the [LEFT] output.
Bypass
Input (Left/Mono & Right)
Output (Left & Right)
.
.
.
.
.
.
16
Содержание PPVERB16
Страница 1: ...DIGITAL EFFECTS MODULE OWNER S MANUAL ...
