2
REMOTE CONTROL
Before use remote control, you have to install two “AAA” battery (not included)
1. POWER button
2. MUTE button
3. FUNCTION button
4. PLAY/PAUSE/PAIR button
5. BACK- button
6. STOP/BAND button
7. NUMBER buttons
8. PROGRAM/CLOCK SET button
9. CD door OPEN/CLOSE button
10. MODE button
11. /MEM+ button
12. NEXT+ button
13 FOLDER-/MEM- button
14. BASS button
15. RECORD button
16. DELETE button
Remark: When the battery runs low, the distance at which the remote control will operate is greatly reduced
and you will need to replace the battery.
USING THE REMOTE CONTROL
1. To use the remote control, point it at the remote sensor and press the button gently, but firmly. Since
the remote control range is reduced when the unit is used at an angle, try to aim it directly at the
remote sensor.
2. Do not expose the remote sensor to strong light (direct sunshine or artificial light) and make sure that
there are no obstacles between the remote sensor and the remote control.
GETTING STARTED
CONNECTING THE AC POWER CORD
Remark: As this product is dual voltage 110/220V, before connecting the AC power cord, please check the
voltage at back of the unit which voltage it was set.
1. Unwind the AC power cord and connect it to a household 110V~ 60HZ or 220V~ 60HZ AC outlet.
SETTING THE TIME
1. In Standby mode, press and hold the Programme/Clock set button (19) for 3 seconds.
“24 Hr”
will be
displayed blinking.
2. Press the BACK/NEXT buttons (15, 17) to select the clock display format (12 hrs or 24 hrs).
Press the Programme/Clock set button (19) to confirm; the hour digits will blink. Press the
BACK/NEXT buttons (15/17) to set the hour. Press the Program/Clock set button (19) to confirm; the
minute digits will blink. Press the BACK/NEXT buttons (15/17) to set the minutes, then press the
Program/Clock set button (19) again to confirm and finish setting the time.
Note: The LCD illumination will automatically brighten for 5 seconds when you press any button in Standby
mode.
