www.PyleUSA.com
3
POWER ON/OFF
POWER ON
1. Press “Power” button, the LED Status Indicator will light up green with power
on sound and LCD screen will display the PYLE logo.
2. The camera system will enter into recording standby mode and the LED Status
Indicator will remain lit green.
3. The LCD will display the currently recording interface and your body camera is
ready to use.
Note:
If you have set the screen saver setting to be 1min/3min/5min, if there is
no interaction with the camera, the camera LCD screen will turn off.
POWER OFF
1. Press and hold the “Power” button for at least two seconds.
2. The current file will be saved to the internal storage and the device will power
down.
VIDEO RECORDING
1. Press the “Video” button until the LED Status Indicator lights up red and flash.
The camera will beep audibly.
2. The camera will enter into Video Recording Mode and begin to record. It will
save a file every 3min/5min/10min/20min. The recording time can be set in
video setting menu list.
Note:
If you have set the Auto night vision in the system setting list to be Manual.
When the lighting is insufficient, press the Up/IR button can enable Night Mode
and the IR LEDs. If you have set the Auto night vision to be Auto. When the lighting
is insufficient, the camera will automatically enable Night Mode and the IR LEDs.
It will automatically return to the normal recording mode when light conditions
improve.
Stop Video Recording
1. Press the “Video” button until the LED Status Indicator Lights up green.
2. The camera will enter Recording Standby Mode.
Note:
If press OK button during Video recording, the file will be marked as
important file, the file name will be with a LOCK word.
