www.PyleUSA.com
2
www.PyleUSA.com
3
For the best results and the satisfaction from your new unit, please read
this manualthoroughly, and retain it for future reference.
ATTENTION
To avoid the possibility of malfunction/damage to the product, damage to
data, or damage to other property, Please follow the points as below.
OPERATION AND MAINTENANCE
• Do not use the device in the vicinity of a TV, radio, stereo equipment, mobile
phone, or other electric devices. Otherwise, the device, TV, or radio may
generate noise.
• In order to prevent the possibility of panel disfiguration, unstable operation,
or damage to the internal components. Do not expose the device to excessive
dust or vibration, or extreme cold or heat (such as in direct sunlight, near a
heater, or in a car during the day).
• Do not place vinyl, plastic or rubber objects on the device, since this might
discolor the panel.
• When cleaning the device,use a dry and soft cloth. Do not use paint thinners,
solvents, cleaning fluids, or chemical impregnated wiping cloths.
• Condensation can occur in the device due to rapid, drastic changes in ambient
temperature when the device is moved from one location to another, or air
conditioner is turned on or off. For example, using the device while condensation
is present can cause damage. If there is reason to believe that condensation
might have occurred, leave the device for several hours without turning on
the power until the condensation has completely dried out.
• Avoid setting all controls to their maximum. Depending on the condition of
the connected devices, doing so may cause feedback and may damage the
speakers.
• When turning on the power in your audio system, always turn on the power
amplifier
LAST
, to avoid speaker damage. When turning the power off, the
power amplifier should be turned off
FIRST
for the same reason.
PRECAUTIONS WHEN USING THE USB 2.0 AND 5V DC TERMINALS
When connecting the USB2.0 connector to computer, please must abide by
following points. If not, it may cause computer crash, breakdown, or losing
data. If the computer or mixer crash, please restart the application software or
computer operating system, or disconnect the mixer, then power on again.
• Use an USB cable. USB 3.0 cable cannot be used.
• Before connecting the computer to the USB 2.0 terminal, exit from any
power-saving mode of the computer (such as suspend, sleep, standby).
3 CHANNEL MIXER
4 CHANNEL MIXER