background image

www.PyleUSA.com

5

B. REPEAT BUTTON:

 This button allows you to play the music in repeat mode 

     (All or Single mode)

ALL -

 All tracks in the USB or SD CARD will be repeated in order without interruption. 

SINGLE -

 Repeat the track that was current playing.

C. PREV BUTTON:

 Use this button to select each of function depending on these     

     three different modes as below.

    • 

In USB/SD mode, use to select previous track.

    • 

In FM/BLLUETOOTH mode, use to select previous channel.

    • 

In FM/BLUETOOTH mode, hold this button will decrease the volume.

D.  NEXT BUTTON: 

Use this button to select each of function depending on these    

      three different modes as below.

    • 

In USB/SD mode, use to select next track or folder,.

    • 

In FM/BLUETOOTH mode, use to select next channel.

    • 

In FM/ BLUETOOTH mode, hold this button will increase the volume.

E. PLAY/PAUSE BUTTON:

 Each press of the 

PLAY/PAUSE BUTTON

 causes the 

    operation to change from play to pause or from pause to play in the USB/SD    
    mode or BLUETOOTH mode. 

    • 

Presses the PLAY/PAUSE BUTTON one time to auto scan all frequencies from  

      87.5MHz to 108MHz in FM mode, the unit will auto store the channel.               

6. LEVEL LED: 

The first LED in the left is the power indicator. It will light on when the  

     unit is on. Other LED Lights are for level indicators.

7. AUX INPUT:

 Connects to a MP3 player or Ipod with 3.5mm Jack. 

8. SIREN: 

Press this button to alarm if there is any emergency situation.

9. MP3 PLAYER VOLUME CONTROL:

 Turn this knob to adjust the volume of AUX    

     input sources.

10. MICROPHONE 2 VOLUME KNOB: 

Turn this knob to adjust the volume of MIC2.

11. MICROPHON E 1 VOLUME KNOB: 

Turn this knob to adjust the volume of MIC1

12. MICROPHONE INPUT 2 JACK: 

MIC 2 Input Jack for connecting an unbalanced    

       low impedance microphone with 1/4” TRS plug.

13. MICROPHONE INPUT 1 JACK: 

MIC 1 Input Jack for connecting an unbalanced  

       low impedance microphone with 1/4”  TRS plug.

14. LOW TONE CONTROL:

 Turn this knob to adjust the bass of the corresponding  

       output signals.

15. HIGH TONE CONTROL:

 Turn this knob to adjust the treble of the corresponding  

       output signals.

16. AUX1/2 VOLUME KNOB:

 Turn this knob to adjust the AUX1/2 output signal  

       level                    

17. FM ANTENNA CONNECTOR:

 Connect for FM antennas.

Содержание PMSA126BU











Отзывы: