Pyle PMP48IR, Руководство пользователя, Страница: 3 / 6

www.PyleUSA.com
OPERATION
• Open the back cover by pressing down on the ‘
Open
’ Button
• Insert 6 x 'D' Batteries then close back cover until locks into position.
Now, you’re megaphone is ready for operation.
• To activate the megaphone, press the ‘
ON/OFF
’ button on the back cover.
• When using the megaphone, place your lips as close as possible to the
megaphone when speaking. Adjust the ‘
Volume Control
’ to the desired
level without causing any howling or feedback.
• Press the ‘
Play
’ button to play recorded voice or press the ‘
Siren
’ button to
activate emergency siren/alarm. To switch off the siren, press the same
button again, or press the ‘
ON/OFF
’ button.
• Adjust the volume control to the min. before recording. To record, press
the
RECORD
button. Now your megaphone s ready for recording.
The longest record time is about 10 seconds. Press the
RECORD
button
again after recording is done.
• Press the
PLAY
Button to activate the recorded materials circularly.
PRECAUTIONS
• Ensure correct polarity of Batteries used. Insert the batteries in the correct
direction by aligning the (-) marks on the batteries with the spring in the
back cover.
• Use new batteries/cells whenever possible.
• When the megaphone is not in use for a long period of time, remove the
dry Batteries and replace.
• Drained Batteries or rechargeable battery will not give sufficient sound
volume.
BATTERY CHARGING
1. The megaphone features a removable rechargeable battery, that plugs-in
directly into the wall power outlet for charging. Once connected to the
wall power outlet, the battery will begin charging automatically (average
time for full-charge :
8.5 hours
). A Red light will be lit while charging and
turns Green when fully charged.
3