2. USING TWO PAIRS OF INPUTS
When front and rear pairs of input are available, input the signals into the "
FRONT
"
and "
REAR
" inputs, respectively. Set the
SUBWOOFER INPUT
switch to “
MIXED
”
position to allow the signals to be fed internally to the
SUBWOOFER
section to
give proper outputs and set the "
Y-CONNECT INPUT
" switch to "
OFF
" position
to allow control of fader from the head unit.
3. USING THREE PAIRS OF INPUTS
All three pairs of inputs on
PLXR3B
can be utilized when front, rear, and
subwoofer pairs of inputs are available from a pre- amp EQ.
Set the
SUBWOOFER INPUT
switch to "
DIRECT
" position to allow independent
subwoofer level control from the EQ and set the "
Y-CONNECT INPUT
" switch
to "
OFF
" position to allow control of fader from the head unit. Note that some
head units offer independent subwoofer output signals as well.
www.PyleUSA.com
8
Head Unit
SUBWOOFER
AMP
MIDRANGE
AMP
TWEETER
AMP
SET TO THE
"MIXED" POSITION
SET TO THE
"OFF" POSITION
