www.PyleUSA.com
2
PLUTV45BTR Installation
1. To avoid potential shorts in the electrical system, be sure to disconnect the (
-
) battery cable
before installation. Use this unit with a 12-Volt battery and negative grounding only.
Failure to do so may result in a fire or malfunction.
2.
Speaker Mounting suggestion as below:
Step 1:
Unbolting the mounting bracket
Step 2:
Slide in the buckle with rubber pad attached to the bracket stand of the speaker
Attach the set to handle bar of vehicle / ship
Step 3/4:
Attach screw to lock the buckle
Step 5:
Using accessories of Butt Connector to Connect Speaker wires (See Illustration
1
)
Step 6 :
Using accessories of Butt Connector to Connect Power Cable (See Illustrations
2
)
