Pyle PLTLD16, Руководство пользователя

Страница: 6 / 26

www.PyleUSA.com
5
•
Do NOT remove the safety covers. There are no useable or serviceable parts inside. You may invalidate
the warranty. Qualified personnel must only service this apparatus.
•
Do NOT tap or shake the screen, you may damage the internal circuits. Take good care of the remote
control, do not drop.
•
Never place hot objects or open flame sources on or close to the TV.
•
High temperatures can melt plastic and lead to fires.
•
To clean the TV use a soft dry cloth. Do NOT use solvents or petrol based fluids. For stubborn stains, you
may use a damp cloth with dilute detergent.
HEADPHONE WARNING
Loud music can damage your hearing irreversibly, therefore do not set the volume to a high level
when listening through headphones, particularly for lengthy listening periods.
WHERE TO INSTALL
Locate the television away from direct sunlight and strong lights, soft indirect lighting is recommended
for comfortable viewing. Use curtains or blinds to prevent direct sunlight falling on the screen.
Place the TV on a sturdy platform of which the surface should be flat and steady.
This will prevent it from falling over. Make sure the television is located in a position where it cannot be
pushed or hit by objects, as pressure will break or damage the screen, and so that small objects cannot be
inserted into the ventilation slots or openings in the cabinet.
Product Introduction
Front View
LED Indicator Remote Control Window (keep clear)
The functions of the TV buttons are
described below.
PLAY/PAUSE:
Play/pause the disc playing.
EJECT: Eject the disc.
SOURCE: Press to select the source.
MENU: Press to display the OSD menu,
Press again to exit the menu.
CH+/CH- :
Press to scan through channels. Use to
move down/up in the OSD menu screen.
VOL+/ VOL- : Press to adjust the volume.
Use to move left/right in the OSD menu
screen VOL+ button can be used to skip
forward to next menu.
POWER: Turn on/off the TV set.