COLOR SYSTEM
NTSC
↑↓ADJUST
EXIT
:
SETUP OK:ENTER
2-1.COLOR SYSTEM
On the picture of TV SYSTEM, when the indicator is on the
COLOR SYSTEM,
press ENTER on the remote to display this
picture and change the mode of NTSC,
PAL,
SECAM,FM by
CH+/CH-
2-2.AUDIO SYSTEM
AUDIO SYSTEM
B/G
↑↓
ADJUST
EXIT
:
SETUP OK:ENTER
On the picture of TV SYSTEM,when the indicator in on the
AUDIO SYSTEM, press ENTER on the unit/remote to display
this picture and change the audio system mode by CH+/CH-.
3.ANT SOURCE
AIR
↑↓
ADJUST
EXIT
:
SETUP OK:ENTER
ANT SOURCE
When the indicator is on the ANT SOURCE, press ENTER on
the unit/remote to display this picture and select AIR or CABLE
by CH+/CH-. When ANT SOURCE is on AIR, this will affect the
frequency list in the AUTO SCAN.
《
16
》
POWER
MENU
UP
DOWN
* Menu: By pressing "MENU" button to pop up the OSD menus.
When in sub-menu, press "MENU"
again to exit the
OSD menus
* / Keys: 1. Press the " / " key to increase or decrease volume.
2. Make item selection in OSD menus to increase or
decrease parameters as well.
* Power:
You may also turn on or off the
monitor by this
"Power" button.
Monitor
Selection
《
7
》
