Pyle PLMR7BTW, Руководство пользователя, Страница: 7 / 12

7
OPERATION
SWITCHING THE UNIT ON/OFF
Press PWR button (10) to turn on the unit.
When the unit is on. Press and hold for 2
seconds to turn off the unit.
SOUND ADJUSTMENT
Press SEL button (10) shortly to select the
desired adjustment mode. The adjustment
mode will be changed in the following
order:
→
BAS-TRE-BAL -LOUD-EQ-ST-DX-USA-VOL
BAS: bass
TRE: treble
BAL: balance
LOUD:
loudness
EQ: equalization
DX: distance
LOC:
local
VOL: volume
By rotating the audio knob (10) it is possible
to adjust the desired sound quality.
DISPLAY TIME
Press CLK button (6) to show the time.
After 5 seconds it will return to show the
information.
SET THE CLOCK
Shortly press the CLK button (6) first while
the clock shows on the LCD. Then press
and hold the
CLK button for 2 seconds.
The “HH” will flash. Rotate the audio knob
(10) to change the hour. After that, press
the
CLK button and the “MM” will flash.
Rotate the audio knob (10) to change the
minute. If any other button is pressed it will
quit the time setting mode and save the
time setting.
LOUDNESS
Increase the audio knob (10) to turn the
LOUD function on/off. This will increase
the overall volume of the unit.
EQ FUNCTION
In EQ you can select the preset EQ mode
by rotating the audio knob (10) as below:
FLAT--POP--ROCK--CLASSIC--EQ OFF
AERA SETTING
In USA/EUR item rotating the audio knob
(10) to select Europe or USA area.
LIQUID CRYSTAL DISPLAY
Exhibit current frequency and activated
functions on the display.
AUXILIARY INPUT
The unit can be connected to a portable
audio player through the
AUX IN jack (11).
RESET FUNCTION
RESET
button (9) must be activated with
either a ballpoint pen or thin metal object.
The
RESET button is to be activated for the
following reasons:
- Initial installation of the unit when all
wiring is completed.
- All the function buttons do not operate.
- Error symbol on the display.
Note: if press
RESET button (9), the unit
can’t work yet, please use a cotton swab
soaked in isopropyl alcohol to clean the
socket on the front panel.
RADIO OPERATION
 SWITCHING TO RADIO MODE
Press MODE button (3) to select radio
mode, the radio mode appears on the
display together with the memory band
and frequency.
 SELECTING THE FREQUENCY BAND
At radio mode, press BAND button (5)
shortly to select the desired band.
The reception band will change in the
following order:
→FM1→ FM2→ FM3→ AM1→ AM2