www.PyleUSA.com
10
To Store/Recall Preset Stations
The radio can store 6 pre-set stations for each band (FM1, FM2 and FM3) for a
total of 18 preset stations.
Memorize a station
• Turn the radio on and select the desired band and station.
• Select a station by or button.
• Press and hold the desired preset button (numbered 1-6 on the face of the
radio) for more than 2 seconds to save the station to that preset number.
To recall a preset station
• Select the desired band.
• Briefly press a preset button (numbered 1-6) to recall the corresponding
preset station.
Automatic Store station/Preset station scan (AMS)
Press and hold the
AMS
button for more than 2 seconds to select six strong
stations and store them in the current band. The radio will automatically scan
the current frequency and enter the six strongest stations into the preset
memory positions for that band. Briefly press the
AMS
button on the remote
control to recall each preset station that saved in the memories in each band.
LOCAL/DX
In urban areas, most stations are strong enough and “
LOCAL ON
” mode should
be selected. Switch to
LOCAL OFF
mode to search for stations with weaker
signals. Press the
LOC
button on the remote control to choose local or distant
reception mode.
STEREO/MONO
FM station is received in stereo mode. However, if the signal is weak or reception
is not as good as you would like, switching to
MONO
mode usually improves
the overall sound quality. Press the
ST
button on the remote control to choose
FM STEREO
or
MONO
audio effect.
USB OPERATION
Insert USB
To play files from a USB device, open the USB port cover and insert the USB
device into the port, the songs will begin to play automatically.
