5.3.3 System setup
Press SET to enter into system setup. Press
or
to select System Setup, press
vertically to confirm entering into system
setup mode. The screen will display as the right
picture. The blue screen, beep, car-backing, view
switch, time displaying and time adjustment can
be set up respectively.
Press or
select up and down, and the selected menu will become pink; press
(18)
(18)
(18) to
5.3.2 Balance adjustment up and down, right and left.
Press SET to enter into menu setup, press or
select Balance Adjustment Up &Down,
Right & Left. press
vertically to confirm
entering into Balance Adjustment Up &Down,
Right & Left. The screen will display as the right
picture.
Press
respectively
+
will
move up and down, right and left to control the volume of the four channels up and down,
right and left. The volume of the four channels will be the same when
+
is in the
middle. Press SET again to exit system setup
(18) to
(18)
(18)
5.3.1 LCD Screen Setup
Press SET to enter into menu setup, press
or
o select LCD screen setup, press
vertically to confirm into LCD screen
setup.
The screen will display as the right picture.
The setup of brightness, color, contrast,
angle and screen view (wide/zoom/center) can be done respectively.
Pres
) to select up and down, the selected menu will become pin
)to make setup. Press SET again to exit system setup.
(18) t
(18)
s or (18
k. Press
or (18
Front
L
Rear
L
Front
R
Rear
R
BALANCE
BRIGHT :32
COLOUR:22
CONTR :25
ANGLE :30
VIEW :WIDE
BRIGHT :32
COLOUR:22
CONTR :25
ANGLE :30
VIEW :WIDE
SYS SETUP
BLUE :ON OFF
BEE :ON OFF
BACK:ON OFF
TIME :ON OFF
TIME :ADJ
SYS SETUP
