Pyle PLD96MU, Руководство пользователя

Страница: 10 / 20

0$,181,7²5$',223(5$7,21
RADIO BAND SELECTOR
At radio mode, repeatedly pressing BAND SELECTOR (11) to select the desired radio band
in the following orders:
Æ
FM1
Æ
FM2
Æ
FM3
Æ
AM1(MW1)
Æ
AM2(MW2)
Æ
MANUAL TUNING UP/DOWN
At radio mode, press
ŹŹű
/
ŲŻŻ
(13) for two seconds to activate the manual tuning mode.
At this manual tuning mode, press
ŹŹű
/
ŲŻŻ
(13) repeatedly to tune the radio frequency
upward or downward to your desired frequency. When a radio station signal is received,
pressing the preset number
1 – 6 (14) for 2 seconds can store the station on the respective
preset number. In case the manual tuning mode has not been operated for 5 seconds, it
will resume to automatic tuning mode.
AUTOMATIC SEEK UP/DOWN
At radio mode, press
ŹŹű
/
ŲŻŻ
(13) for automatic seeking the frequency upward or
downward to the next strong station received. By pressing the preset number 1 – 6 (14) for
two seconds can store the station on the respective preset number.
AUTO MEMORY STORE
At radio mode, press APS (15) for two seconds to start searching from the current
frequency and storing the strongest signal stations into the corresponding preset station
number
1 – 6 (14) . The searching will stop until one cycle search is finished.
AUTO MEMORY SCAN
At radio mode, press APS (15) shortly to scan all the preset stations on the selected radio
band and stop for several seconds on each preset station scanned. During scanning, press
APS (15) again to stop this scanning and the current radio station will be broadcasted.
PRESET MEMORY
At radio mode, press any one of the preset number 1 – 6 (14) button to select a station
which had been stored in the memory. Press any one of the preset number 1 – 6 (14)
button for two seconds can store the current broadcasting station in the memory. This unit
can store up to 30 stations (FM1 x 6, FM2 x 6, FM3 x 6, AM1 x 6, AM2 x 6).
MONO / STEREO CONTROL
Press the MO/ST (9) to select stereo or mono mode. The desired mode “STEREO” or
“MONO” will appear on the LCD DISPLAY (5) shortly. When stereo signal is received,
stereo indicator will appear on LCD DISPLAY (5) .
9