
Radio Operation
Automatic Memory Storing &
Program Scanning
Loud Function
Touch the LUD section on the
touch screen to switch the
LOUND ON or OFF.
LUD
Select Audio Mode
Touch the SEL section repeatedly
on the touch screen to select the
desired item(volume/bass/treble/
balance/fader)
SEL
Select BG Color Function
Touch the SEL section briefly on
the touch screen to select the
“BG Color” by touching repeatedly
the SEL knob , then touch the
VOL+/- (or rotate the VOL+/- on
the front panel) to select your
desired Background Color .
SEL
Buzzer Function
Touch the SEL section on touch
screen repeatedly to switch the
Buzzer ON or OFF by using the
VOL+/- .
SEL
20
Touch it to select the other item .
In Radio mode, touch the APS
section or swing the SEL knob
briefly in the APS/DISP direction ,
the radio briefly plays all the preset
stations of the frequency band .
Scan Function
APS
1
2
3
MOD
6
4
5
BND
ST
DX
DISC-IN
CH
6
SWF
POP
11:08 AM
FM1
98.10
MHZ
SWF
LUD
DSP
CLK
APS
VOLUME-
SEL
Rock 03
ST
Mute Function
Use your finger touch the “
”
section , it will mute the sound
but the disc continues playing.
Touch it again to resume .
In Radio Mode, Touch the APS
section and keep on the touch
screen(or swing the SEL knob in
direction of the APS/DISP) for
Automatic Preset Setup
APS
about 2 seconds to active automatic
station storage. The radio searches
within the current frequency band,
e.g. FM1, for the stronger signal level
until the search cycle has finished .
The six strongest stations are then
allocated to the corresponding storage
locations . Then the station of the first
storage location is set .
EQ Function
Touch the DSP section repeatedly
on the touch screen to select the
EQ (pop/rock/jazz/classic/flat)
DSP
In Radio mode, touch the ST
section on screen (or press MO/ST
button on remote ) to select mono
Mono/Stereo Function
ST
or stereo mode. you can sometimes
improve reception of distant stations by
selecting mono operation .