6
• SET THE CLOCK
Press the
DSP
button (15), the clock is
shown on the LCD display. Then hold
down the button until the clock flashes.
Then press the
TUNE/TRACK/SKIP
button (17) to change hours or
TUNE/TRACK/SKIP
button (16) to
change minutes.
• MUTE
Press
MUTE
button (2) to mute down
the sound instantly. If any button is
pressed in the mute state, the mute
state is released.
• EQUALIZATION
Press
EQ
button (12) to turn on
equalization function and to select
desired audio mode. There are five
kinds of mode as below:
• LIQUID CRYSTAL DISPLAY
Exhibit current frequency and activated
functions on the display (27).
• REMOTE SENSOR
Point the remote control handset to
the remote sensor
IR
(23). Press the
function keys on the handset to control
the system.
• ESP FUNCTION
If the unit has the electronic
shockproof function, it can be
shockproof about several tens of
seconds.
• AUXILIARY INPUT
The unit can be connected to a
portable audio player through the
AUX
IN
jack (11).
• RESET
RESET
button (28) must be activated
with either a ball point pen or thin metal
object. The
RESET
button (28) is to
be activated for the following reasons:
- Initial installation of the unit when all
wiring is completed.
- All the function buttons do not operate.
- Error symbol on the display.
OPERATION
Note:
In this product design, there has
different sound accompanying with every
button pressed and the sound is designed
differently according to the customers.
• SWITCHING ON/OFF THE UNIT
Switch on the unit by pressing any
button (except
OPEN
button (7)).
When system is on, press
POWER
button (9) to turn off the unit.
• OPEN THE FRONT PANEL
Press
OPEN
button (7) to fold down
the front panel.
• SOUND ADJUSTMENT
Press
PUSH SELECT
button (10)
shortly to select the desired adjustment
mode. The adjustment mode will
change in the following order:
By rotating the knob (10) clockwise or
counter-clockwise, it is possible to
adjust the desired sound quality.
Press and hold
PUSH SELECT
button
(10) for several seconds to enter into
the selection for the situation of beep
sound, then rotate the knob (10)
clockwise or counter-clockwise to
select as follows:
- BEEP 2’nd mode:
The beep is only generated when all
allowed double function button is
pressed long (several seconds).
e.g.
When preset button (18) is pressed.
When
BAND/LOUD (ENTER)
button
(13) is pressed.
When
AMS/D-AUD
button (14) is
pressed.
- BEEP ALL mode:
The beep is generated when every
button is pressed.
- BEEP OFF mode:
The beep is disabled.
• LOUDNESS
Press the
BAND/LOUD (ENTER)
button (13) for several seconds to
reinforce the bass output. Press it for
several seconds again to release this
function.
VOL
BAS
TRE
BAL
FAD
(Volume)
(Bass)
(Treble)
(Balance)
(Fader)
BEEP 2ND
BEEP ALL
BEEP OFF
FLAT
CLASSICS
POP M
ROCK M
DSP OFF
