Page. 2
P / N : 570-981853-02
7.
CLOCK CONTROL
The display key serves to show available information as following:
- Time
- Track No. / Playing Time (during CD and MP3 mode)
- Directory Name / File Name (during MP3 mode and the file must contain directories or files name written by the CD writer)
SETTING CLOCK TIME
1.
Press CLOCK button and hold it until the display flash and release.
2.
Press “+” button to set HOUR and press “-” to set MINUTE.
8.
STEREO/MONO CONTROL
Press this button to select
“
FM STEREO
”
or
“
MONO
”
reception.
9.
EJECT BUTTON
Press the button to eject the disc inside disc slot.
10.
PANEL RELEASE BUTTON (FIGURE A)
To detach the front panel, press the release button so that the panel fold down from vertical position to horizontal position and
then pull it off of the chassis at horizontal position.
To re-attach the panel, push the fold-down metal frame forward until it locks to the original postion. Then, put the panel at the
right side of the position first and then press the left side of the panel until the mechanism lock it into place.
11.
MODE SELECTION
Press this button to select Radio (TUNER), CD/MP3 (S-CDP), CD Changer Control (CDC) or Auxiliary input (AUX) mode.
12.
LOCAL/DISTANT SELECTOR
Press this button to prevent strong local stations from overlapping weaker stations. For normal operation, press this button again
for distance.
OPERATING INSTRUCTIONS
LOCATION OF CONTROLS
1.
POWER ON/OFF CONTROL
Press the button to turn the power
“
ON
”
or
“
OFF
”
.
Note :
The unit can be turn on by pressing any keys on the panel (except panel release button & disc eject button). It will help
the user who cannot find the power button in dark.
2.
BAND SELECTOR
Each time this button is pressed, the radio band is changed. The indication
“
FM1
”
,
“
FM2
”
,
“
FM3
”
,
“
MW1
”
or
“
MW2
”
will
appear on the display according to your selection.
3.
SCAN CONTROL
Press this button to scan the receivable FM / MW stations. When receivable stations are tuned in, they are monitored for
approximately 5 seconds before advancing to the next receivable station. Press SCAN button once again to stop scanning as
desired.
4.
PRE-SCAN/AUTO-STORE BUTTON
This button allows you to enjoy
“
Preset Memory Scan
”
function by pushing it shortly, and
“
Auto-Store Memory
”
function by
pushing it more than 2 seconds.
*
PS (PRESET MEMORY SCAN) - It calls the memorized station frequencies ( from 1-6 ) automatically every 5 seconds.
*
AS (AUTO-STORE MEMORY) - It searches all station frequencies upward and memorize automatically 6 stations by
catching the frequency which has scan-stop level, the memorized station is shown on LCD as
“
CH1...6
”
. After memorizing,
auto-store memory function will be changed to
“
Preset Memory Scan
”
function automatically.
5.
DISC SLOT
Holding the disc and insert into the disc slot. The disc mechanism will automatically engage into CD/MP3 play mode.
6.
LCD DIGITAL DISPLAY
The unit utilizes a digital type display which shows numerical indication of station FREQUENCY and other FUNCTIONS.
REMARK :
AT ANY TIME, IF THE WIRE IS DISCONNECTED, THE RESET SWITCH MUST BE PRESSED AGAIN BEFORE OPERATE THE
RADIO (REFER TO PAGE 4 FOR DETAIL). OTHERWISE, THE RADIO MAY NOT WORK PROPERLY.
13.
LOUD CONTROL
Press this button to activate the loudness circuitry which compensates for loss of high and low frequencies during low volume
levels.
14.
MUTE CONTROL
Press this button to mute the volume control and “MUT” will appear on LCD display.
15.
AUDIO / SETTING SELECT
Briefly press the button to select volume, bass, treble, balance or fader adjustment in cyclical mode.
When pressing the button for more than 2 seconds, it activates as unit setting selection in cyclical mode as following. The unit setting
can be changed by using either “VOL +” or “VOL –” button.
FIGURE A