Caution
In areas with heavy traffic, please do not wear earphones while detecting, in case an accident occurs.
Always obtain permission before searching any site.
Keep away from the areas that may have buried electrical or gas lines / cables.
Do not detect in private property, military owned areas or where you do not receive permission to detect.
When digging out the target, use a reasonable digging method that will not damage or cause harm to
yourself or any possible object within the surface area.
Try your best as to not destroy the vegetation, cause damage to any animals / insects.
Take care of mother nature!
Troubleshooting
SYMPTOM
SOLUTION
No power, there is no indication
There is no sound when powering on
1.Be sure battery is installed correctly.
2.Be sure battery cover is closed correctly.
3.Replace the battery.
Sound heard is an irregular tone, or the
target identification cursor chatters /
distorts
Make sure there are no electromagnetic interference sources
present, such as power lines, cables, electronic fences, etc.
Keep away from areas that are prone to cause interference or
you can reduce the detector's sensitivity.
The signal is unstable and the position
of the target identification cursor is
changing
1.Scan at a different angle, in order to determine whether you
can get a more stable signal.
2.If the target is buried deeply, you could try to increase the
sensitivity or speed up the search coil scanning speed, hovering
over the designated area. .
3.Maybe more than one metal targets are buried, you could try
to increase the sensitivity or set different discrimination ranges
when scanning.
4.Maybe you found a severely oxidated target, or the ground
contains some type of magnetic field or mineralized content.
Attempt to decrease the sensitivity and continue scanning.
www.PyleAudio.com
