background image

www.PyleUSA.com

6

In Wireless BT mode, press the HOME button for 5 seconds to shut 

down the controller and disconnect from the Switch. Short press the 

Pairing button could to shut down the controller directly, short press 

the HOME button for 1 second to turn on and wake up the controller.

Low Voltage Alarm

When the battery of the controller is lower than 3.55V±0.1V, the 

current working channel light flash to indicate low battery. 

If continue to use the controller until the voltage lower than 3.45 V, 

the controller is automatically entered into sleep state.

USB Mode Function

Connect the controller with USB cable and insert the cable to Switch 

USB port, the controller will be automatic identification as a wired 

game pad, and you want open the switch cable connection function 

in USB cable mode. Connect USB cable with the controller and insert 

it to PC, it will be automatic identification as an X-INPUT Game pad 

mode, LED 1 + LED 4 flash. On PC X-INPUT mode, long press the "-" + 

"+" button for 3 seconds to switch to D-INPUT mode and LED 2 + 

LED 3 indicator light flash. Connect USB cable with the controller 

and insert it to PS3 console and press the L button together, it will be 

automatic identification as a PS3 Game pad. Connect USB cable with 

the controller and insert it into the USB port of Android device, it will 

be automatically recognized as Android Game pad mode, and LED 1 

+ LED 4 light will be on. 

LED indication of each USB cable mode:

 

Switch game pad is be 

automatically assigned the corresponding channel indicator by the 

Switch; 

X-input mode: 

LED 1 + LED 4 indicator light on; 

D-input mode: 

LED 2 + LED 3 indicator light on; 

PS3 mode:

 Gamepad channel indicator allocated by PS3 console.

TURBO speed adjustment, 3 gears speed, 8Hz-12Hz-15Hz,

Default to 12Hz.

Press the TURBO button and press the corresponding button to set 

TURBO; You can set A, B, X, Y, L, ZL, R, ZR; If you want to cancel the 

setting, repeat the setting operation; Adjust TURBO speed: 

TURBO+UP: Increase one gear speed; TURBO+DOWN: Decrease one 

gear speed.

Содержание PGMC1NTN









Отзывы: