Pyle PDWM2122, Руководство пользователя, Страница: 4 / 10

Grill
ON/OFF
Frequency Display
Battery Cover
MIC Input
Headset Microphone
www.PyleUSA.com
4
Belt-PackTransmitter
Product features
1. Super noise reduction function, high signal-to-noise ratio.
2. Strong anti-interference ability, high efficiency noise suppression output.
3. The corresponding range of frequency is wide, ultra low distortion.
4. Perfect working condition indication and battery indicator.
5. Dual channel design with two microphone can be used at the same time
without interference with each other.
Use connection instructions
1. The receiver is placed near a computer or multimedia speakers, connected
power supply with the power adaptor and USB cable, plug the one side of the
provided audio cable into the mixed output port. The other end is connected to
the computer microphone input(MIC IN) or multimedia audio input port. The
receiver two antennas are pulled out and adjusted with the ground vertical,
then turn on the receiver.When the power indicator light is bright, the system is
in standby mode. (Notice: Receiver is better not to work at the dead angle
position to ensure a good signal environment.)
2. Opentransmitter battery cover, properly put battery into the battery compart-
ment, then close the battery compartment. (Please pay attention, do not install
the battery oppositely.)