Pyle PDIC6LT, Руководство пользователя

Страница: 4 / 6

3
1.
Position the cutting guide against the required speaker
placement and trace around.
2. Cut out the traced area using a pad saw or other suitable tool.
3. Take the speaker unit out of the packaging and remove the
grille. Connect the speaker wire to the appropriate “
+
” and “
-
”
connections (select the desired tapping for 70V units).
4. Locate the speaker unit into the cut-out, ensuring that the 4
rotating fixing clamps stay turned inward.
5.
Once located, turning the 4 fixing screws clockwise will cause
the fixing clamps to rotate outward and tighten onto the
mounting surface.
6.
Put the speaker grille onto speaker in place by magnetism.
www.PyleUSA.com