13
Only insert CDs, and
only
one CD at a time in each CD tray. Never interfere with the motor driven
movements of the CD drive tray. Do not push the CD compartment closed since this would damage the
mechanics and result in malfunctions.
Close the drive tray by pressing the
OPEN/CLOSE button
again. The appliance reads in the CD (“READ”
is displayed). The total amount of tracks and the total CD playing time is briefly displayed on the LC display.
The appliance the automatically sets the CUE mark at the beginning of the music of the first track on the
CD. The CD player switches to pause mode after reading in the CD.
The CD compartment can not be opened in playback mode. This prevents any accidental interruptions to
playback. Stop the CD before pressing the OPEN/CLOSE button.
c) Playback
Press the
PLAY/PAUSE button
. Playback begins. The time display starts to runs and the green LED next
to the button goes on. The point at which playback is started is automatically saved as CUE mark.
There are two ways of stopping playback.
1. Press the
PLAY/PAUSE button
. The appliance switches to pause mode at the current playback point
and the green LED next to the button flashes.
2. Press the
CUE button
and the appliance will return to the CUE mark and switch to pause mode.
d) Track selection
You can select the CD track with the respective track skip button or The CD player goes to the
beginning of the selected track.
If you hold down the track skip button, the CD player will skip through the track numbers until you let go
of the button.
Track skip button
The next CD track is selected by pressing the button . The CD player goes to the first track of the CD in
playback mode if the button in pressed during the last track of the CD.
Track skip button
The beginning of the previous track is selected by pressing the button once. The CD player goes to the
beginning of the track currently being played if this button is pressed during playback.
+10 – button
You can skip 10 tracks on the CD by pressing this button.
Tracks selected with the track skip button are selected in the mode in which the CD player was before the
button was pressed.
Examples:
If the track skip button is pressed in pause mode, the CD player switches to the beginning of the
selected track and remains in pause mode.
If the track skip button is pressed in playback mode, the CD player switches to the beginning of
the selected track and starts to play it.
The CD player always switches to pause mode directly after selecting a track if the CD player is
set to single-track playback mode (SINGLE).
The appliance automatically resets the CUE mark to the beginning of the track each time a track is
selected. The red LED next to the CUE button flashes briefly.
e) Selecting a section within a track
14
The
shuttle wheel (1)
is used to quickly find a specific point within a track. The search speed depends on
how far the wheel is turned clockwise or anti-clockwise. The wheel automatically returns to the central
position after letting go of it. To search forwards, turn the
shuttle wheel
clockwise. To search backwards,
turn the
shuttle wheel
anticlockwise.
The
JOG wheel (1a)
is used to quickly find a specific point within a track. In pause mode, it is very easy to
set the start of the beat precisely with the rotary wheel, since the track is scanned in very small steps
(frames) and the search steps can be heard. To search forwards, turn the
JOG wheel
clockwise. To search
backwards, turn the
JOG wheel
anticlockwise.
The playing speed is altered with the
JOG wheel (1a)
in playback mode. The extent to which the playing
speed is changed depends on the speed at which the wheel is turned.
You can operate the SHUTTLE or JOG wheel in pause or playback mode. In pause mode, the CD player
switches to “stutter mode” as soon as one of the wheels is operated.
f) SEARCH
This type of search is ideal for quickly finding points within tracks. Hold down the
Search button
or .
The appliance begins to search backwards or forwards.
The CD can be heard during the search.
The appliance automatically increases the search speed if one of search buttons is pressed for a longer
period of time.
This function allows you to work through the tracks. The button can be pressed in playback or pause
mode. The appliance switches to “stutter mode” after pressing one of the search buttons in pause mode.
g) CUEING
You can select the playback starting point with the CUE function. The advantage of this function is that, for
example, pause at the start of tracks are not played and there are therefore no delays after starting to play a
track. The red LED next to the
CUE button
flashes whenever a new CUE mark is set. The CUE LED lights
up permanently as soon as the appliance is in CUE mode.
Auto – CUE:
The appliance automatically sets the CUE mark to the point where the music starts after it is switched on or
one
of the
track skip buttons
or is pressed.
Back –CUE function:
Press the
CUE button
in playback mode and the CD player will go to the beginning of the song or return to
the saved CUE mark and switch to pause mode.
Saving CUE marks manually:
First way:
The CD player is in playback mode.
1. Press the
PLAY/PAUSE button
once you have arrived at the desired music point and the CD player
will switch to pause mode.
2. Start playback again by pressing the
PLAY/PAUSE button
. The red LED next to the
CUE button
flashes briefly. The CUE mark was set where the playback was restarted.
3. If you now press the
CUE button
, the CD player jumps back to the CUE mark and switches to pause
mode. The red LED next to the
CUE button
goes on.
Second way:
The CD player is in pause mode:
1. Search for the desired starting point with the
search buttons
or the
JOG wheel
.
2. Start playback by pressing the
PLAY/PAUSE button
. The red LED next to the
CUE button
flashes