www.NutriChefKitchen.com
www.NutriChefKitchen.com
8
9
7. In order to make operating time longer, the fan will still work for
cooling the plate, it is better to plug out after the fan stops working.
8. If the appliance is not be used for a long period of time, pull out the
power plug.
9. Some models have structural design against cockroaches, if needed,
you can put something like mothball to expel the cockroaches.
5. TROUBLESHOOTING AND TREATMENT
During operations, if any errors occurred, please check the following
table before calling for service. Below are common errors and solutions.
If the above solutions can’t fix the problem, unplug the appliance
immediately, contact service center for inspection and repairing, note
the error code and report it to service center ltd. To avoid any danger and
damage to the appliance, do not disassemble or repair it by yourself.
PROBLEM
CHECK POINTS
SOLUTION
After connecting
the power and
pressing the
“Power” key, the
appliance has no
response
Power outage?
Is the plug connected
firmly?
Is the fuse broken down?
Use when electricity
resumes
Check the root causes
carefully. If the problem
can’t be fixed,please
contact service center for
checking and repairing.
Induction Cooker
send out “Beep”
Sound
Incompatible cookware or
no cookware is used?
Is the cookware not
considerable placed from
the center of the heating zone?
Is the cookware bigger
than 12cm?
Replace compatible
cookware for the
induction cooker
Replace the cookware at
the center of the defined
heating zone
Change the diameter
of cookware bigger
than 12
No operation during
the heating being
in use
Is the cookware empty or the
temperature too high?
Is the air intake/exhaust vent
clogged or dirt has
accumulated
Is the cooker working over
2 hours without any external
instruction?
Please check whether
the appliance is being
misused
Remove the stuff clogging
the air intake/exhaust vent.
Operate the appliance
again after cooling down.
Reset cooking modes
or use timer function
PHENOMENON
CHECK POINTS
SOLUTION
No Cookware or
Incompatible cookware used
Low-Voltage
High-Voltage
If error signal E0, E3,
E5 shows, please
check whether the
cookware is not
suitable or switch on
the appliance again
after it cooled down
naturally.
If error signal E1, E2,
E4, E6, E7, occurs
please contact service
center for checking
and repairing
Top Plate Overheat
Top Plate Sensor Open Circuit
IGBT Overheat
Top Plate Sensor Short Circuit
Internal Circuit Error
Error Codes Occur E0
Error Codes Occur E1
Error Codes Occur E2
Error Codes Occur E3
Error Codes Occur E4
Error Codes Occur E5
Error Codes Occur E6
Error Codes Occur E7
