www.PyleUSA.com
6
Using the Radio
1. Turn
ON
the unit.
2. Press
Mode
button (Unit/Remote control) to select FM mode.
3. Press "
Scan
" button which was located on front panel, unit will auto search and
store the radio stations with the strongest signal.
4. Press
PRE/NEXT
button to select desired radio station.
Ensure that you have the extended the antenna located on the rear of the speaker.
It will ensure the best possible radio quality and signal strength.
Use of the External Battery Option
To use the PA speaker longer than the internal battery life, you can connect the PA
speaker to a external 9V Battery Source.
1. Find the
INPUT DC 9V
on the top control panel.
2. Use the correct cable connect the
INPUT DC 9V
.
Notes:
The PA speaker will consume the internal battery first, when it is low, the LOW
BATTERY indicator light located on the control panel will turn on, you can use the
external 9V battery to power on the unit. The external12V battery will also charge
the internal battery while in use.
Recording and Repeat function
When you insert USB or SD card, insert the Microphone, press Record/Replay button
more than 3 seconds, the unit will record what you say, then short press this button,
unit will replay the recorded files. Use PRE/NEXT to select the recorded files. If you
don't want to keep the recorded files, press and hold MODE button for 3 seconds,
unit will delete the recorded files.
This product can expose you to a chemical or group of checmicals,
which may include
”Lithium Carbonate”
which is known in the state
of California to cause cancer, birth defects, or other reproductive harm.
For more info, go to
https://www.p65warnings.ca.gov/
.
