w
Features and Controls: PYD1918 Mixer
Pyle Pro Mixer Owner’s Manual – 1
ne
Power Switch
and
Red
light Illumination
Equalizer On/Off Switch
Effect Switch
(Send/Receive)
Lets you
connect a sound effect
device, such as reverb,
sampler, etc. and either play
the signal from it or play
another input through it.
BNC Lamp Adaptor
Allows
you to connect a 12V/3W
lamp to light the panel
Headphone Jack
Accepts headphones with
1/4” plug
Headphone Level Control
Headphone CUE/PGM
Control
Allows you to listen
simultaneously or separately
to the CUE material or the
active program
Zone Level Control
Lets you control the mixer’s overall ZONE
volume level, if you set up remote speakers or DJ booth monitors
Zone Mono/Stereo Selector
Zone Balance Control
Master Level Control
Lets you control mixer’s overall volume level
Master Mono/Stereo Selector
Master Balance Control
Channel Assign Switch
Lets you select the input source to be mixed
by the Crossfade Slider Control
Crossfade Slider Control
Allows you to smoothly switch between
the input sources assigned to Channel A and Channel B
MIC Talkover
Allows you to lower the
level of the input sources so you can talk
them using the DJ Mic
MIC1/2 Level Controls
Lets you control
the MIC levels as they enter the mix
MIC1/2 Tone Controls
10-Band Equalizer
Allows you to tailor the mixer output to suit
your taste or performance environment. Each frequency range can
be cut or boost by up to 10dB.
Dual Display Meter
Indicates the levels of Left and Right Master
Channels
Channel CUE Switch
Allows you to monitor the selected audio
input source and prepare it prior to mixing it in.
Channel Input Selector
Lets you choose the input source to play
for each channel
Channel Gain Control
Lets you adjust the gain of the input source
MIC Frequency Kill Switches
Allows
you to kill the selected frequency range
instantly for interesting effects. LED
lights to indicate kill is activated.
MIC 2 Input Jack
(on input panel)
For connecting a balanced or
unbalanced low impedance microphone
with 1/4”plug
MIC 1 Combo Input Jack
For
connecting a balanced or unbalanced
low impedance microphone with XLR-
type or 1/4” plug
