NOTE:
Level hold
PLAY/PAUSE
button to enter function change as follows:
CD-USB
When the
CD
function model has not put in
CD
/
MP
3
disc, inserts
USB
card, will automatic
switching to
USB
card the playback. To confirm recording successful or not, select the
CD
function and level hold
PLAY/PAUSE
button to enter into USB function, insert USB card the
unit will read the
USB
songs.
CD/MP3 FUNCTION OPERATION:
Select to the
CD
function. press the
OPEN/CLOSE
button to open the
CD
door and the unit
LCD displays <
OP
>.
1.
Place your CD or MP3 disc in the drawer with the printed label side facing up.
2. Press the
OPEN/CLOSE
button once more to close the
CD
door and the unit LCD display
<CLO>. the disc will spin for a few seconds while the player reads the disc and will
automatism playback.
PLAY CONTROL IN CD/MP3/USB MODEL
:
1. Place your
CD
or MP3 disc in the drawer or insert
USB
card. Will
automatism
playback. Play will continue until the end of the
DISC
or
USB
card. When the disc
ends, the display again shows the total number of tracks on the disc or
USB
card.
You may also stop playback at any time by press the
STOP
button.
2. Adjust the
OFF/VOLUME
control to the desired level.
3. In play model: Press the
SKIP FWD
button on the unit front panel or
UP/FF
button on the
remote control to begin the next song.
4. Press the
SKIP REV
button on the unit front panel or
DN/FB
button on
the remote control
to begin the previous song that has just been played.
5. Press the
10 or FOLDER -10
button to skip forward or recede 10 tracks in
CD/MP3/USB MODEL.
SELECTING THE FOLDER PLAYBACK FOR MP3/USB:
In stop model: Press
10
or
FOLDER -10
button to selected the or
FOLDER- to confirm the
FOLDER
tracks number. Press PLAY/PAUSE button to playback.
The song number and folder number of your selected track will be shown consecutively in
every 2 seconds. Your may also stop playback at any time by press the STOP button.
5