Pyle Pro PT-689D, Руководство пользователя

Страница: 4 / 6

Panel Information
DISPLAY
Press the DISPLAY button to select between COUNTER MODE and TEXT MODE.
NORMAL DUBBING
This unit enables you to dub a recorded tape by using the built-in double deck mechanism. It is performed only one way from deck A to Deck B.
1. Insert source tape in DECK A and a tape in DECK B.
2. Press DUBBING button to enter dubbing standby mode.
3. Press DUBBING button once again to start dubbing.
4. To stop dubbing, simply press the STOP ( ■ ) button of DECK A or DECK B.
REVERSE MODE
Each press of the REVERSE MODE button will change the reverse mode to the following setting:
: Side A of the tape will be played if ( ► ) button is pressed.
: Side B of the tape will be played if ( ◄ ) button is pressed.
: For deck B only
If (
► ) button is pressed, the player will autoreverse to Side B of the tape when Side A is finished.
If ( ◄ ) button is pressed, the player will stop automatically when the end of Side B has been reached.
For Deck B only
If ( ◄ ) button is pressed, the player will autoreverse to Side A of the tape when Side B is finished.
If ( ► ) button is pressed, the player will stop automatically when the end of Side A has been reached.
For Deck B only
When the PLAY ( ► ) or ( ◄ ) button is pressed, the player will start playing the corresponding side of the tape.
The whole tape will be played continuously until the STOP ( ■ ) button is pressed.
A B
When the PLAY ( ► ) button of Deck A is pressed, the player will start playing Side A of the tape in Deck A, and continue with Side A,
then Side B of the tape in Deck B. The player will continuously play in this loop until the STOP ( ■ ) button is pressed.
When the PLAY ( ► ) button of Deck B is pressed, the player will start playing Side B of the tape in Deck B, then Side A of the tape
start playing Side B of the tape in Deck A, and continue with Side A of the tape in Deck A. The player will continuously play in this
loop until the STOP (
■ ) button is pressed.
When the PLAY ( ◄ ) button of Deck B is pressed, the player will start playing Side B of the tape in Deck B, then Side A of the tape in
deck A, and continue with Side A of the tape in Deck B. The player will continuously play in this loop until the STOP ( ■ ) button is
pressed.
Note
: The tape in Deck A winds back to the first position while the tape in Deck B is being played.
DNR
To play a tape recorded with DNR system, set DNR to ON position.
REC LEVEL
The recording level can be controlled adjusting the REC LEVEL mode.
REC / PAUSE
A record, broadcast of the program source of component connected to the line terminals can be recorded by the tape deck.
When recording, use Deck B.
1. Press REC/PAUSE button to enter standby mode. REC icon flashes on display.
2. During the REC icon is flashing, press PLAY direction button (
► ) or ( ◄ ) button to indicate the desired recording direction of Deck B.
Press STOP ( ■ ) to confirm the predefined direction.
3. Press REC/PAUSE button to start recording.