www.pyleaudio.com
2
1)
High Input Jack:
Connect high
level devices to this jack.
2)
Low Input Jack:
Connect low
level devices to this jack.
3)
Gain:
This sets the volume gain
level for Channel 1.
4)
Bass:
This control adjusts the low
frequency level.
5)
Treble:
This control adjusts the
high frequency level.
6)
Reverb:
Switches on/off the
reverb effect for Channel 1.
7)
Channel 2 Controls:
Same as for
Channel 1.
8)
Reverb level:
Adjusts overall
reverb level for both channels.
9)
Distortion:
Adjusts overall
distortion effect. Turn to off for
no effect.
10)
Power LED:
Illuminates when
power is switched on.
11)
Master:
Adjusts overall volume.
1)
Power Switch:
Switches amplifier
on/off.
2)
Power Cord:
Connect the included
power cord here. Plug into a
grounded power outlet only!
3)
Phones:
This is your headphone
connection. Inserting the
headphones disables the internal
speaker (great for practicing).
4)
Line Out:
Lets you output a line
level signal (non-amplified).
Internal speaker is not disabled.
5)
Return:
Use this jack to bring
back processed signal (see
6
).
6)
Send:
This jack lets you insert an
effects processor into the signal
path.
7)
Reverb Remote:
Connect a
footswitch (not included) to
remotely switch on/off the
internal reverb effect.