6 Attaching the Hi-Hat Control pedal
[1] Move out the pillar from the rubber foot.
[2] Attach the Hi-Hat control pedal to the
pillar.
4 Attaching the Drum Module
Use M4x15mm x2 screws
Use M4x25mm x2 screws
Tear off the adhesive tape
Use a
screwdriver
5 Attaching the cymbal pads
[1] Attach the Cymbal holders to the Holder
clamps on the arms.
[2] Use a drum key to tighten the screws on
the Holder clamps.
[3] Move out the wing nut and the felt washer
of each Cymbal holders.
[4] Attach the Cymbal pads to the cymbal
holders.
[5] Attach the felt washer and wing nut,
tighten the wing nut of each cymbal.
use a drum key to
tighten the screws.
Wing nut
move out
Felt washer
Cymbal holder
Cymbal holder
Wing nut
Felt washer
Cymbal pad
attach and tighten
attach the cymbal holders
to the holder clamps arms.
move out the
pillar from the
rubber foot.
[1]Tear off the adhesive tape on the drum
module.
[2]Place the Drum Module on the drum
module holder, and use the included
screws to fasten it.
attach the Hi-Hat
control pedal to
the pillar.
All manuals and user guides at all-guides.com
