Pyle Pro PDWM8400, Руководство пользователя

Страница: 8 / 9

TROUBLESHOOTING
Some common problems and their solutions are printed below.
PROBLEM SOLUTION
No sound;
RF light(s) not
glowing
No sound;
RF light(s) not
glowing
Received signal is
noisy; contains
extraneous sounds
with transmitter on.
Noise from receiver
with transmitter off.
Momentary loss of
sound as transmitter
is moved around
performing area.
•
Make sure the transmitter
•
POWER switch is ON and the receiver is plugged into a
power source
•
Check battery.
•
Check receiver squelch setting.
•
Check receiver antenna connection(s).
•
Make sure antennas are in line of sight of transmitter.
•
Turn up receiver audio
VOLUME
control
•
Check for proper connection between receiver and
karaoke unit
•
Check battery
•
Remove local.Sources of RF interference.
•
If using a guitar or other instrument, check connections.
•
Two transmitters may be operating on the same
frequency. Locate and turn one off.
•
Signal may be too weak, reposition antennas.
If possible, move them closer to transmitter.
•
Adjust receiver squelch control.
•
Remove local sources of RF interference.
•
Reposition receiver or antennas.
•
Reposition receiver and perform another walkthrough
test and observe the RF indicators. If audio drop outs
persist, mark these dead spots in performing area and
avoid them during performance
www.PyleUSA.com
8