Pyle Pro PDWM5300 Скачать руководство пользователя страница 6

5

The on air
indicator does 
not light up

The wireless microphone is not 
turned on.

 Turn on the wireless microphone 

The microphone receiver is not 
turned on.

Turn on the microphone receiver 
and the connected audio equipment 

The microphone receiver is not 
connected properly.

No sound

The battery in the wireless 
microphone is weak.  

Replace the battery.

The microphone receiver is not 
turned on .

Turn on the microphone receiver 
and the connected audio equipment.

The connected audio equipment is 
not turned on.

Turn on the audio equipment.

The speakers/headphones. are not 
connected to the audio equipment.

Connect the speakers/ 
headphones

The sound is 
distorted 

The battery in the wireless 
microphone is weak.

Replace the battery.

The AUDIO OUT on the receiver 
is not set correctly.

A howling noise 
heard from the 
speakers.

The distance between the wireless 
microphone and speakers are too 
close.

Move the wireless microphone 
away from the speakers or 
change the direction of the 
microphone.

The battery in the wireless 
microphone is weak

Replace the battery.

Adjust the volume controls.

Turn on the microphone receiver 
and the connected audio equipment 

Make sure mic and receiver are 
set to the same frequency.

Frequency not set correctly.

Содержание PDWM5300








Отзывы: