www.PyleUSA.com
www.PyleUSA.com
HANDHELD MICROPHONE
OPERATION
1. Unscrew the battery cover at the end of microphone, put a 9V battery into
compartment with correct polarities, then close the cover.
2. Move "
ON/OFF
" switch to "
ON
" position, "
PWR
" indicator lights blue. If it
doesn't turn on, please check the voltage of battery or polarities.
If the "
LOW
" indicator turns on, this indicates the battery is dead.
Please replace with a fresh battery.
3. The "
MUTE
" switch cuts off audio output without powering off the
microphone. Move the switch down to engage the mute feature, and up to
turn it off.
3
4
RECEIVER
OPERATION
1. Pull out the antennas A and B. Make sure they are completely extended and
vertical.
2. Insert one end of attached audio cable into "
AF OUT
" on rear panel, and the
other end into "
MIC IN
" or "
AUX IN
" of amplifier or mixer.
3. Connect the power adaptor from DC 12V of receiver to a main power socket.
4. Switch
ON
the receiver. The power indicator turns
ON
.
5. Switch
ON
the microphone. The "
RF
" indicator on receiver lights green.
The "
LEVEL
" indicator will light up when you speak into the microphone.
Adjust the volume by VOL-A and VOL-B control knobs.
