5
cue point, play then pause the disc (LED on PLAY/PAUSE blinks). Press CUE button to memorize that
point(CUE LED glows). Play the disc. Pressing the CUE button will then return play to cue point. Holding
down on the CUE button changes the CUE function to preview. Releasing the CUE button returns you to the
preset cue point.
9.
BPM
You can press this button once to turn function on. You can tap this button to the rhythm of the music to get the
BPM(beats per minute) value. Press for 3 seconds, it changes back to PITCH value.
10.
TIME/OUTRO(Time button)
This button switches the time display between elapsed playing time, track remaining time and total remain time,
and also switches on off the “Outro
”
function. When the display shows OUTRO, the player only plays the last
30 seconds of each track.
11.
PITCH(Pitch button)
When the PITCH button is pressed (PITCH LED glows),moving the fader will change the play speed up to
+-16%.When it is off, moving the fader will indicate the expected play speed on the LCD, but without affecting
the actual speed.
12.
PITCH BEND(Pitch Bend Button)
When each of the 2 CD players is playing a CD, the pitch bend function allows the positioning of the bass beats
to be matched after the pitch has been matched. The pitch will automatically rise when the + button is pressed
and return to the original pitch when it is released.
The pitch will drop while the – button is pressed. By changing the pitch in this way, the positioning of the beats
can be matched.
13.
CONT./SINGLE(Cont./Single Buttons)
Press these to switch between the SINGLE AUTO CUE and CONTINUOUS play modes. The selected mode is
indicated on the LCD in SINGLE mode, after each track, the unit auto cues the point at which the song starts.
When SINGLE AUTO CUE or CONTINUE is blinking, the unit is in relay mode.
14.
SEARCHING(Search Buttons)
These buttons are used to accurately change the positions where disc play will start.
15.
STOP
Pressing this button stops operation of the player.
16.
CONNECTOR PORTS
The 9-pin termination permits the connection of the control unit to the main unit.
Содержание PDCD205
Страница 1: ......
