Pye Video PY840G Скачать руководство пользователя страница 2

Precautions

– 2 –

EN

Precautions

This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible 
eye injury.

CAUTION:

 

 USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED 
HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

CAUTION:

 

 VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STARE INTO 
BEAM.

LOCATION:

 

INSIDE, NEAR THE DECK MECHANISM.

WARNING

:  

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS 

APPLIANCE TO RAIN OR MOISTURE.

RADIO-TV INTERFERENCE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a 
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed 
and used in accordance with the instructions, may cause harmful interference to radio communications. However, 
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful 
interference to radio or television reception, which can be determined by turning the equipment off and on, the user 
is encouraged to try to correct the interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and receiver.
3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4) Consult the dealer or an experienced radio/TV technician for help.

This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

FCC WARNING-

 This equipment may generate or use radio frequency energy. Changes or modifications 

to this equipment may cause harmful interference unless the modifications are expressly approved in the 
manual. The user could lose the authority to operate this equipment if an unauthorized change or modifica-
tion is made.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

ATTENTION:  POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE 

DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.

A NOTE ABOUT RECYCLING

This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your 
local recycling regulations.
Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning 
chemical wastes.

Laser Safety

For Customer Use:
Read carefully the information located at the back of this unit and enter below the Model No. and the Serial No. Retain this 
information for future reference.

Model No. 

____________________

Serial No. 

____________________

 Make your contribution to the environment!!!

• Used up batteries do not belong in the dust bin.
• You can dispose of them at a collection point for used up batteries or special wastes.

Contact your council for details.

The lightning fl ash with arrowhead symbol, within 
an equilateral triangle, is intended to alert the user 
to the presence of uninsulated “dangerous 
voltage” within the product’s enclosure that may 
be of suffi cient magnitude to constitute a risk of 
electric shock to persons.

The exclamation point within an equilateral triangle 
is intended to alert the user to the presence of 
important operating and maintenance (servicing) 
instructions in the literature accompanying the 
appliance.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, 
DO NOT REMOVE COVER (OR BACK). NO USER 
SERVICEABLE PARTS INSIDE. REFER SERVICING 
TO QUALIFIED SERVICE PERSONNEL.

The caution marking is located on the rear of the cabinet.

PY840G_E8A05UD.indd   2

PY840G_E8A05UD.indd   2

2006/04/11   17:35:33

2006/04/11   17:35:33

Содержание PY840G





























Отзывы: