www.proindecsa.com / [email protected]
OPERATING AND MAINTENANCE MANUAL
SBM SERIES SELF-PRIMING PUMP
9
ENG
9. TRANSPORT
The machines in question shall be supplied in suitable packaging to ensure proper protection during
all stages of transport. If, on receipt of the goods, the packaging is damaged, it is necessary to ensure
that the machine has not been damaged during transport and that it has not been tampered with.
In the event of damage to the equipment or if any part of the machine is found to be missing, the
transporter and the manufacturer must be notified immediately and the corresponding photographic
documentation must be provided. Materials used to protect the equipment during transport must be
disposed of using the disposal channels existing in the country of destination.
10. LIFTING AND DISPLACEMENT
For all lifting and moving operations, the operator must use the minimum personal protection devices
required for the operations to be carried out (safety footwear, gloves and protective helmet).
Machines with a weight of more than 25 kg must be moved using suitable handling systems with a
capacity greater than the weight of the machine to be handled (see the weight indicated on the pac-
kaging). If it is necessary to use belts for handling the machine, these must be in good condition and
must be of adequate strength for the weight of the machine to be handled.
Pumps weighing <25 kg may be lifted manually by the operator without the aid of lifting equipment.
11. STORAGE
The equipment must always be stored in covered, not excessively humid places, protected from
atmospheric agents and with temperatures between -10°C and 40°C, avoiding direct exposure to sun-
light. If the machine is to be stored for long periods, it is advisable not to remove it from its packaging.